Ojjo, Inc.

A single-axis solar tracker consisting of a series of A-frame shaped foundation with actuators attached to each leg that are connected at one end to a common rotating assembly supporting multiple solar panels. Concerted action of the actuators causes the common rotating assembly to rotate about an axis of rotation. The system may include a central torque tube supported by the series of A-frame foundations or a frame assembly that is hingedly attached to each A-frame foundation via a torque arm.

A center structure support for single-axis trackers to support tracker driver motors and tracker center structures that transfer torque across rows to enable a single tracker motor to rotate the torque tubes of several adjacent rows. A pair of driven screw anchors are joined above ground with a center structure support and a pair of clamp assemblies that capture the driving coupler at the upper end of each screw anchor. The clamp assemblies are captured in distal ends of the center structure support via bolts that enable adjustment center structure relative to the driven legs.

An A-frame shaped truss foundation system for a single-axis tracker with moderately sloped legs that translate lateral loads into tension and compression without substantially increasing the magnitude of the lateral load force while optimizing material usage. Several such truss foundation systems are installed in a row to support a torque tube of a single-axis solar tracker. An adapter joins ends of adjacent upper legs and separates the truss legs by an angle more than 35-degrees up to 70-degrees. In some cases, the adapter may have an integrated bearing.

In a machine for driving screw anchors and other foundation components, a desired embedment depth is calculated based on a minimum required embedment depth, work point height and length of available upper leg sections. Once calculated, the machine automatically drives the screw anchor to the depth so that one of the available upper leg lengths will fit between the driven screw anchor and apex truss hardware. If uplift is detected during driving, the machine will add additional embedment depth. In-situ validation of driven screw anchors may be performed after the embedment depth is reached.

A single-axis solar tracker consisting of a series of A-frame shaped foundation with actuators attached to each leg that are connected at one end to a common rotating assembly supporting multiple solar panels. Concerted action of the actuators causes the common rotating assembly to rotate about an axis of rotation. The system may include a central torque tube supported by the series of A-frame foundations or a frame assembly that is hingedly attached to each A-frame foundation via a torque arm.

In a machine for driving screw anchors and other foundation components, a desired embedment depth is calculated based on a minimum required embedment depth, work point height and length of available upper leg sections. Once calculated, the machine automatically drives the screw anchor to the depth so that one of the available upper leg lengths will fit between the driven screw anchor and apex truss hardware. If uplift is detected during driving, the machine will add additional embedment depth. In-situ validation of driven screw anchors may be performed after the embedment depth is reached.

A single-axis tracker supported by multiple A-frame-shaped single-truss foundations that translate lateral loads into axial forces of tension and compression, and at least one truss foundation supporting the torque tube drive motor or other tracker component subject to axial loads to provide support for lateral loads as well as loads oriented along the axis of the torque tube.

Fixed-tilt solar arrays constructed from screw anchors. In some cases, purlins are attached directly to truss legs. In others, they are attached to truss caps joining the free end of each truss leg. In still further ones, screw anchors are driven in rows and interconnected by a pair of hinged members, one of which provides a mounting plane for solar panels. Each screw anchor may serve as a connection point for the trailing hinged member of the first foundation and the leading hinged member of the next foundation. In still further cases, a hinged truss cap may be used to accommodate different tilt angles with the same foundation.

A machine for rotary driving screw anchors into underlying ground and related. The machine has a mast with a rotary driver and a mandrel driver oriented on a common axis. The mandrel driver passes a mandrel through the rotary driver and the screw anchor to allow the mandrel to be actuated ahead of the screw anchor while the rotary driver drives the screw anchor into the ground. Alternatively, the mandrel driver may also drive a hammering drill through the screw anchor to clear a path ahead of it through subsurface rocks.

A truss foundation for single-axis trackers that is optimized to resist moments. For foundations that experience lateral loads as well as moments, the foundation supports the rotational axis via a moment connection that is deliberately offset below the work point to reduce the impact of the bending moment. Spacing between the truss legs and the angle of the legs impact the height of the truss work point and, by extension, the available offset below the work point down to the minimum height of the axis of rotation specified by the tracker maker.