Altec Industries, Inc.

Systems, methods, devices, and assemblies for electrically insulating lower controls of a low voltage aerial device. The lower controls may include two or more electrically insulating components working concurrently to provide electrically insulating capabilities to electrically isolate one or more electrical cables or other electrically conductive components associated with the lower controls. For example, one or more electrical cables may communicate with an upper portion of the low voltage aerial device, such that the electrically insulating components break an electrical path to ground from the upper portion of the low voltage aerial device.

Automatic bond on techniques for remote operations on energized power lines are disclosed. A remote assembly may comprise a robot unit and a jib. The jib may have an end effector at a distal end, a proximal end coupled to the robot unit, and an insulating section between the distal end and the proximal end. The end effector may couple to the energized power line, and the insulating section may electrically isolate the robot unit from the energized power line. An actuator at the proximal end may be selectively actuatable to electrically connect to the end effector, thereby electrically bonding the robot unit to the energized power lines to enable operations on energized power line components. The jib may toggle the robot unit between the electrically bonded and grounded or floating states to allow the robot unit to operate on both grounded and energized components.

Systems and methods for tensioning an electrical cable adapted to be manipulated by one or more remotely operated robotic appendages. Tensioners mounted to a rigid object configured to adjust the tension of a connecting line attached to an electrical cable such that the tension of the connecting line is applied to a length of the electrical cable such that another portion of the electrical cable becomes slack, thereby allowing one or more robotic appendages to remove, replace, repair, or conduct any alteration or modification to said electrical cable or to a rigid object that supports the electrical cable.

Systems and methods for tensioning an electrical cable adapted to be manipulated by one or more remotely operated robotic appendages. Tensioners mounted to a rigid object configured to adjust the tension of a connecting line attached to an electrical cable such that the tension of the connecting line is applied to a length of the electrical cable such that another portion of the electrical cable becomes slack, thereby allowing one or more robotic appendages to remove, replace, repair, or conduct any alteration or modification to said electrical cable or to a rigid object that supports the electrical cable.

Systems and methods for tensioning an electrical cable adapted to be manipulated by one or more remotely operated robotic appendages. Tensioners mounted to a rigid object configured to adjust the tension of a connecting line attached to an electrical cable such that the tension of the connecting line is applied to a length of the electrical cable such that another portion of the electrical cable becomes slack, thereby allowing one or more robotic appendages to remove, replace, repair, or conduct any alteration or modification to said electrical cable or to a rigid object that supports the electrical cable.

Systems and methods for establishing and maintaining an electrical bonding connection between remotely operated equipment and an energized power line using one or more robotic arms disposed on the remotely operated equipment. Sensory information is communicated to an operator at a remote location across a dielectric gap to maintain electrical isolation of the remotely operated equipment.

Systems and methods for establishing and maintaining an electrical bonding connection between remotely operated equipment and an energized power line using one or more robotic arms disposed on the remotely operated equipment. Sensory information is communicated to an operator at a remote location across a dielectric gap to maintain electrical isolation of the remotely operated equipment.

Systems and methods for tensioning an electrical cable adapted to be manipulated by one or more remotely operated robotic appendages. Tensioners mounted to a rigid object configured to adjust the tension of a connecting line attached to an electrical cable such that the tension of the connecting line is applied to a length of the electrical cable such that another portion of the electrical cable becomes slack, thereby allowing one or more robotic appendages to remove, replace, repair, or conduct any alteration or modification to said electrical cable or to a rigid object that supports the electrical cable.

A device for detecting the condition of electrical bonding of a plurality of conductive components of an aerial device, the aerial device comprising a plurality of electrical bonding cables, a control module, a gradient control device, a feedback wire to carry an input signal from the conductive components to the control module, and a power source. The device uses the input signal to determine the condition of the electrical bonding of the conductive components including the condition of the electrical bonding cables and connections therebetween and is configured to notify an operator if an unacceptable condition is determined based on a predetermined acceptance standard.