AMO DEVELOPMENT, LLC

In an ophthalmic surgical laser system, a patient interface device for coupling a patient's eye to the laser system includes a lens cone with a frustoconical shaped shell for coupling to the laser system and a suction ring for coupling to the patient's eye, the lens cone and the suction ring being joined together by clamping. A cap is provided for use with the lens cone as an installation aid. In the configuration supplied to the user, the lens cone is partially embedded in and snapped to the cap. The cap has a portion with a relatively large diameter and multiple ribs for easy handling. The user holds the cap to install the lens cone on the laser system, and pulls the cap to unsnap it from the lens cone. The lens cone is attached to the laser system with a bayonet mount that provides tactile feedback to the user.

Methods and systems for performing laser-assisted surgery on an eye form one or more small anchoring capsulotomies in the lens capsule of the eye. The one or more anchoring capsulotomies are configured to accommodate corresponding anchoring features of an intraocular lens and/or to accommodate one or more drug-eluting members. A method for performing laser-assisted eye surgery on an eye having a lens capsule includes forming an anchoring capsulotomy in the lens capsule and coupling an anchoring feature of the intraocular lens with the anchoring capsulotomy. The anchoring capsulotomy is formed by using a laser to incise the lens capsule. The anchoring feature can protrude transverse to a surface of the intraocular lens that interfaces with the lens capsule adjacent to the anchoring capsulotomy.

A compact system for performing laser ophthalmic surgery is disclosed. An embodiment of the system includes a mode-locked fiber oscillator-based ultra-short pulsed laser capable of producing laser pulses in the range of 1 nJ to 5 μJ at a pulse repetition rate of between 5 MHz and 25 MHz, a resonant optical scanner oscillating at a frequency of 200 Hz and 21000 Hz, a scan-line rotator, a movable XY-scan device, a z-scan device, and a controller configured to coordinate with the other components of the system to produce one or more desired incision patterns. The system also includes compact visualization optics for in-process monitoring using a beam-splitter inside the cone of a patient interface used to fixate the patient's eye during surgery. The system can be configured such that eye surgery is performed while the patient is either sitting upright, or lying on his or her back.

An ophthalmic surgical laser system includes: a laser that produces a pulsed laser beam having a pulse energy and pulse repetition rate; a high frequency fast scanner; an XY-scan device; a Z-scan device; and a controller. The controller controls the high frequency scanner to produce a scan line having a scan width; controls the XY-scan device and the Z-scan device to carry out of first sweep of the scan line in a first sweep direction and to carry out a second sweep of the scan line in a second sweep direction that is not parallel to the first sweep direction thereby defining an overlap region. At least one of the pulse energy, repetition rate, XY-scan speed, and the scan width is varied so as to accelerate the cutting speed and reduce the exposure of ophthalmic tissue in the overlap region to multiple exposures of laser pulses configured to modify ophthalmic tissue.

Embodiments of this invention generally relate to ophthalmic laser procedures and, more particularly, to systems and methods for lenticular laser incision. In an embodiment, an ophthalmic surgical laser system comprises a laser delivery system for delivering a pulsed laser beam to a target in a subject's eye, an XY-scan device to deflect the pulsed laser beam, a Z-scan device to modify a depth of a focus of the pulsed laser beam, and a controller configured to form a top lenticular incision and a bottom lenticular incision of a lens in the subject's eye.

Methods and apparatus are configures to measure an eye without contacting the eye with a patient interface, and these measurements are used to determine alignment and placement of the incisions when the patient interface contacts the eye. The pre-contact locations of one or more structures of the eye can be used to determine corresponding post-contact locations of the one or more optical structures of the eye when the patient interface has contacted the eye, such that the laser incisions are placed at locations that promote normal vision of the eye. The incisions are positioned in relation to the pre-contact optical structures of the eye, such as an astigmatic treatment axis, nodal points of the eye, and visual axis of the eye.

In a laser delivery system for an ophthalmic laser surgery system, a laser beam scanner employs a single or two MEMS micromirror arrays. Each micromirror in the array is capable of being independently actuated to rotate to desired angles. In one embodiment, one or two micromirror arrays are controlled to scan a laser beam in two directions. In another embodiment, a micromirror array is controlled to both correct optical aberrations in the laser beam and scan the laser beam in two directions. In yet another embodiment, a micromirror array is controlled to cause the laser beam to be focused to multiple focal spots simultaneously and to scan the multiple focal spot simultaneously. The ophthalmic laser surgery system also includes an ultrashort pulse laser, a laser energy control module, focusing optics and other optics, and a controller for controlling the laser beam scanner and other components of the system.

Methods and systems for planning and forming incisions in a cornea, lens capsule, and/or crystalline lens nucleus are disclosed. A method includes measuring spatial dispositions, relative to a laser surgery system, of at least portions of the corneal anterior and posterior surfaces. A spatial disposition of an incision of the cornea is generated based at least in part on the measured corneal anterior and posterior spatial dispositions and at least one corneal incision parameter. A composite image is displayed that includes an image representative of the measured corneal anterior and posterior surfaces and an image representing the corneal incision.

A laser eye surgery system includes a laser source, a ranging subsystem, an integrated optical subsystem, and a patient interface assembly. The laser source produces a treatment beam that includes a plurality of laser pulses. The ranging subsystem produces a source beam used to locate one or more structures of an eye. The ranging subsystem includes an optical coherence tomography (OCT) pickoff assembly that includes a first optical wedge and a second optical wedge separated from the first optical wedge. The OCT pickoff assembly is configured to divide an OCT source beam into a sample beam and a reference beam. The integrated optical subsystem is used to scan the treatment beam and the sample beam. The patient interface assembly couples the eye with the integrated optical subsystem so as to constrain the eye relative to the integrated optical subsystem.

A patient interface device for an ophthalmic surgical laser system includes a lens cone component for coupling to the laser system and a suction ring component for coupling to the patient's eye. The suction ring includes a gripper with an opening for receiving and retaining the lens cone, and a flexible skirt joined to the gripper for coupling to the eye with a vacuum force. The flexible skirt includes a circular inner edge and a circular outer edge for contacting the eye surface, and a plurality of circumferentially distributed scleral support protrusions protruding from a circumferential side wall. The end surface of the scleral support protrusions are sloped in a side cross-sectional view. The scleral support protrusions have a length to width ratio from 1.1 to 2.1, and an arc-angle ratio of the scleral support protrusions to the gaps between them is from 2.2 to 3.0. The scleral support protrusions contact the surface of the eye when the skirt is docked to the eye, which minimize intraocular pressure increase due to docking and applanation while still achieving a good vacuum seal between the suction ring and the eye. The scleral support protrusions function to prevent major deformation of the sclera when the cornea is applanated.