Baker Hughes Oilfield Operations LLC

Methods and apparatus for generating, storing, and distributing electrical power within a wellbore, or for powering downhole tools and systems from the surface.

Systems and methods employing sensors, data processing, and control algorithms to automate and optimize drilling, fracturing, and fluid production processes in real-time.

Deployment and operation of specialized sensors within wellbores to monitor formation properties, fluid flow, and well integrity, often using acoustic, optical, or radiation-based methods, and integrating with well operations.

Design and engineering of specialized mechanical and electrical tools for drilling, coring, perforating, and manipulating equipment within the wellbore environment.

Specialized fluid compositions, including additives and inhibitors, used in oil and gas exploration and production for purposes like drilling, fracturing, cementing, corrosion inhibition, and formation stimulation.

Pumps and blowers specifically adapted or designed for unique fluid types, challenging environments, or particular industrial, medical, or consumer applications, often involving debris, specific gas mixtures, or precise delivery requirements.

Innovations in the design, materials, and maintenance of seals, valves, and related components to improve durability, reduce leakage, and enable specific pump functions like high-pressure operation or automated seal replacement.

Formulated liquid compositions designed for specific industrial applications, such as non-flammable cleaning, thermal management in electronics, or as low-viscosity, high-flash-point base fluids.

Methods and components for converting power into mechanical motion to drive pump mechanisms, encompassing electric motors, hydraulic actuators, and specialized motion converters like ball screws or solenoids.

Novel or optimized methods and apparatus for efficiently separating desired products, recovering valuable components, or managing effluents from complex hydrocarbon mixtures and refining processes.

Mechanisms and control systems for precisely moving valve elements, often involving electric motors, cams, solenoids, or pneumatic/hydraulic pilots, to achieve desired flow or position.

Incorporating sensors and processing capabilities directly into valve systems to monitor operational state, detect malfunctions, measure flow parameters, or verify proper installation.

Systems that employ imaging and image processing to automatically detect defects, verify states, or ensure quality control in manufactured goods, printed materials, or industrial processes.

Systems employing various sensing modalities, including X-ray, fiber optics, ground-penetrating radar, and image analysis, for detecting threats, monitoring perimeters, and inspecting objects in security or transportation contexts.

Techniques for building three-dimensional metal objects layer-by-layer using metal powders, including powder bed fusion, binder jetting, and directed energy deposition. This theme encompasses process mechanics, equipment design, and operational control for AM systems.

Systems and methods for real-time sensing, modeling, and closed-loop control of additive manufacturing parameters to ensure part quality, consistency, and process efficiency. This includes thermal management, atmospheric regulation, and precise material deposition.

Abrasive slurry compositions used in semiconductor manufacturing for planarizing wafer surfaces, typically containing abrasive particles and chemical additives to achieve specific material removal rates and selectivity.

Integration of additive manufacturing with subtractive manufacturing (e.g., machining, cutting) or other traditional processes within a single system or workflow to create parts with improved features, surface finish, or material properties, or to enable new manufacturing paradigms.

Techniques for enhancing, interpreting, and modeling subsurface data, including seismic, electromagnetic, and nuclear magnetic resonance measurements, often involving advanced signal processing, inversion, and parallel computing methods.

Valves specifically designed for managing fluid power in hydraulic or pneumatic systems, including components for pressure regulation, flow direction, and system centering.

Technologies and systems specifically designed for extracting thermal energy from subterranean heat sources, including magma reservoirs or low-permeability fractured formations.

Development of novel motor architectures beyond traditional radial flux designs, including linear, axial, or multi-armature configurations, often to optimize for specific performance characteristics like torque density or form factor.

Mixtures of liquid crystal compounds and other additives, such as monomers or carbon black, designed to achieve specific optical, electrical, or physical properties for use in liquid crystal displays (LCDs) or other electro-optical devices.

Technologies focused on converting waste plastics, residual polymers, or aromatic waste streams into valuable hydrocarbon liquids, gases, or chemical feedstocks through thermal or catalytic pyrolysis, followed by upgrading and separation processes.

Systems and methods for monitoring, regulating, and diagnosing the performance and health of pumps and fans, including speed control, flow rate management, abnormality detection, and safety mechanisms like overspeed safeguards.

Valves engineered to automatically open or close based on pressure differentials, preventing over-pressurization, controlling flow direction, or suppressing backflow in fluid systems.

Manufacturing processes and techniques for producing stator cores, windings, and coils, including lamination, impregnation, hairpin winding, and segment coil bending, to improve motor efficiency, power density, or reliability.

Focuses on optimizing the geometry, structure, and internal flow channels of impellers, blades, and housings to improve fluid dynamics, efficiency, or specific performance characteristics of centrifugal pumps and fans.

Processes and reactor designs for breaking down heavier hydrocarbon feedstocks into lighter, more valuable products using catalysts, including methods for regenerating spent catalysts through coke burning or other means.

Use of magnetostatic or vector magnetometers and associated processing for detecting objects, mapping magnetic fields, or determining position and orientation in various applications.

Design and engineering solutions for creating self-contained, mobile, or miniaturized pump systems, often incorporating battery power, ergonomic features, and integrated components for ease of use and transport.

Computational methods and design principles for generating optimized geometries, internal structures (e.g., lattices, minimal surfaces), or functional features that are specifically enabled or enhanced by the capabilities of additive manufacturing.

Systems and methods for producing fuels, such as Sustainable Aviation Fuel (SAF), or hydrogen with a reduced carbon intensity, often leveraging alternative feedstocks, Fischer-Tropsch synthesis, or integrated energy recovery.

Development of materials with tailored porosity, surface chemistry, or structure, such as metal-organic frameworks (MOFs), zeolites, or superficially porous particles, for selective adsorption, ion exchange, or chromatographic separations.

Technologies and systems for removing unwanted components or separating desired gases from a mixed gas stream, including adsorption, absorption, and membrane-based methods.

Specialized valve designs for domestic and commercial applications involving water distribution, temperature control, and air conditioning, often focusing on integration, materials, and specific flow characteristics.

Membrane and depth filtration for industrial separation, gas purification, and bioprocess clarification including cross-flow, dead-end, tangential flow filtration, and oil/water separation.

Methods and compositions for identifying, quantifying, or characterizing specific biological molecules (e.g., nucleic acids, proteins, metabolites, antibodies) or microbial species, often for diagnostic, prognostic, or quality control applications.

Integration of electric motors into larger systems (e.g., vehicles, power tools) and safety features for high-voltage components, including control interfaces, mechanical integration, and environmental protection (e.g., waterproofing).

Development and processing of metal powders with specific magnetic properties, including soft magnetic alloys, permanent magnet materials, and insulated powders for electronic components, often involving precise control of particle size, morphology, and composition.

Equipment and processes for separating solid particles from liquid or gas phases in industrial settings, encompassing mechanical screening, filtration of molten materials, and various filter media designs.

Techniques and systems for optimizing pump operation, including capacity modulation, energy management, pulsation reduction, and precise fluid dispensing to improve performance and reduce energy consumption.