ViOptix, Inc.

A tissue oximetry device utilizes at least three or at least four different wavelengths of light for collection of reflectance data where the different wavelengths are longer than 730 nanometers. The three or four wavelengths are utilized to generate a range of reflectance data suited for accurate determination of oxygenated hemoglobin and deoxygenated hemoglobin concentrations. The relatively long wavelengths decrease optical interference from certain dyes, particularly methylene blue and PVPI, which may be present on tissue being analyzed for viability and further enhance the generation of accurate reflectance data. The wavelengths are 760 nanometers, 810 nanometers, and 850 nanometers, or 760 nanometers, 810 nanometers, 850 nanometers, and 900 nanometers.

An oximeter probe determines an oxygen saturation for the tissue and determines a quality value for the oxygen saturation and associated measurements of the tissue. The quality value is calculated from reflectance data received at the detectors of the oximeter probe. The oximeter probe then displays a value for the oxygen saturation with the error value to indicate a quality level for the oxygen saturation and associated values used to calculate oxygen saturation.

A sleeve or sheath includes a body having a top opening. The body covers a handheld oximeter probe or a portion of the probe. The sleeve has a shape that approximately matches the oximeter probe or portion of the probe, which is covered by the sleeve. The sleeve has a top opening that allows a user to slide the oximeter probe into the sleeve. The sleeve is transparent to radiation emitted and collected by the oximeter probe. The sleeve is formed of a material that prevents patient tissue, fluid, viruses, bacteria, and fungus from contacting the covered portions of the oximeter probe. The sleeve leaves the probe relatively sterile after use so that little or no clearing of the probe is required for a subsequent use, such as when the probe is covered with a new, unused sleeve.

An oximeter measures oxygen saturation for two or more different tissue depths and shows these results on a screen. A probe of the oximeter has multiple different distances between source and detector sensors. One probe implementation has fixed sensor positions. Other implementations include sensors on a moveable platform or openings to accept sensors, which allow a user to vary a distance between sensors.

A retractor has an oximeter sensor at its tip, which allows measuring of oxygen saturation of a tissue being retracted by the retractor. The tip includes one or more openings for at least one source and detector. A specific implementation is a spinal nerve root retractor with an oximeter sensor.

A laparoscopic medical device includes an oximeter sensor at its tip, which allows the making of oxygen saturation measurements laparoscopically. The device can be a unitary design, wherein a laparoscopic element includes electronics for the oximeter sensor at a distal end (e.g., opposite the tip). The device can be a multiple piece design (e.g., two-piece design), where some electronics is in a separate housing from the laparoscopic element, and the pieces (or portions) are removably connected together. The laparoscopic element can be removed and disposed of; so, the electronics can be reused multiple times with replacement laparoscopic elements. The electronics can include a processing unit for control, computation, or display, or any combination of these. However, in an implementation, the electronics can connect wirelessly to other electronics (e.g., another processing unit) for further control, computation, or display, or any combination of these.

A device includes source and detector sensors. In a specific implementation, the device has two near detectors, two far detectors, and two sources. The two near detectors are arranged closer to the two sources than the two far detectors. A light-diffusing layer covers the two near detectors. The device may be part of a medical device that is used to monitor or measure oxygen saturation levels in a tissue. In a specific implementation, light is transmitted into the tissue and received by the detectors. An attenuation coefficient is first calculated for a shallow layer of tissue. The attenuation coefficient is then used to calculate an attenuation coefficient for a deep layer of tissue.

A method for determining oxygen saturation includes emitting light from sources into tissue; detecting the light by detectors subsequent to reflection; and generating reflectance data based on detecting the light. The method includes determining a first subset of simulated reflectance curves from a set of simulated reflectance curves stored in a tissue oximetry device for a coarse grid; and fitting the reflectance data points to the first subset of simulated reflectance curves to determine a closest fitting one of the simulated reflectance curves. The method includes determining a second subset of simulated reflectance curves for a fine grid based on the closest fitting one of the simulated reflectance curves; determining a peak of absorption and reflection coefficients from the fine grid; and determining an absorption and a reflectance coefficient for the reflectance data points by performing a weighted average of the absorption coefficients and reflection coefficients from the peak.

A bone oximeter probe includes an elongated member and a sensor head at an end of the elongated member to make measurements for a bone. The measurements can indicate the viability or nonviability of the bone. In an implementation, the probe is advanced through an incision in soft tissue, towards the underlying bone, and positioned so that the sensor head faces the bone to be measured. Optical signals are sent from the sensor head and into the bone. The bone reflects some of the optical signals which are then detected so that measurements for the bone can be made. Some of these measurements include an oxygen saturation level value, and a total hemoglobin concentration value of the bone.

A tissue oximetry device utilizes at least three or at least four different wavelengths of light for collection of reflectance data where the different wavelengths are longer than 730 nanometers. The three or four wavelengths are utilized to generate a range of reflectance data suited for accurate determination of oxygenated hemoglobin and deoxygenated hemoglobin concentrations. The relatively long wavelengths decrease optical interference from certain dyes, particularly methylene blue and PVPI, which may be present on tissue being analyzed for viability and further enhance the generation of accurate reflectance data. The wavelengths are 760 nanometers, 810 nanometers, and 850 nanometers, or 760 nanometers, 810 nanometers, 850 nanometers, and 900 nanometers.